Loading...

Connected Water Systems Could Help Georgia Utilities Detect Problems Earlier

Smart Utilities

Published by IOT Georgia Research & Editorial Team

Connected Water Systems Could Help Georgia Utilities Detect Problems Earlier

On May 31, 2024, a large water main broke in downtown Atlanta. Within days, another failed in Midtown. Businesses, hospitals, events and neighborhoods lost water or faced boil-water advisories for several days, and the city declared a state of emergency. Investigations highlighted a problem familiar to many water utilities: old pipes are only part of the risk. When crews tried to isolate the breaks, some valves were hard to find or did not work properly, which made the outages larger and longer.

Since then, Atlanta has committed to a long-term overhaul of its water system, estimated at about $2 billion over 20 years, and has deployed leak detection devices at more than 1,600 locations serving critical facilities such as hospitals and senior centers. Commissioner Greg Eyerly said in April 2026 that the city still sees breaks almost every day. Atlanta's experience has prompted many Georgia water utilities to ask a practical question: how can connected sensors and data help us find problems earlier, before a leak becomes a crisis? This article looks at the answer. For the metering side of water systems, see our guide to smart water meters and leak detection.

What the Atlanta Crisis Revealed

Atlanta's water system includes roughly 3,000 miles of pipe, much of it decades old, with some segments more than a century old. The city reported roughly 500 water main breaks in the 12 months before the 2024 crisis. In response, it formed the Atlanta Water Advisory Group with the U.S. Army Corps of Engineers and other experts, piloted AI-enabled leak detection devices in Midtown and the Westside, and expanded monitoring around hospitals and other critical facilities. City officials estimated the leak detection work would save about 160 million gallons of water a year. Ahead of the 2026 FIFA World Cup, Atlanta Watershed invested in projects to improve its ability to isolate segments of the system when breaks occur.

The lessons apply well beyond Atlanta. Many Georgia cities and counties have aging cast iron and asbestos cement mains, incomplete valve records and limited real-time visibility into their networks.

Why Early Detection Matters

Many large main breaks start as smaller leaks or pressure problems that grow over weeks or months. Finding those problems early allows planned repairs instead of emergency responses, reduces water loss, protects nearby infrastructure and limits service disruptions. Georgia also requires public water systems above a certain size to complete annual water loss audits, which push utilities to measure and reduce non-revenue water.

The Connected Water Toolkit

TechnologyWhat It DetectsWhere It Fits
Acoustic leak sensorsSound of escaping water on pipes, valves and hydrantsDistribution mains, especially older cast iron
Pressure monitoringPressure drops, surges and transientsThroughout the network and at critical customers
Flow monitoring and district meteringUnexplained increases in nighttime flowZones of the network separated for measurement
Smart water metersCustomer-side leaks and unusual usageResidential and commercial service connections
Valve condition and location dataWhether valves exist where records say and can be operatedIsolation planning for breaks
Water quality sensorsChlorine, turbidity and pressure changes that may signal contamination riskTreatment plants and key points in distribution
Satellite and AI analysisLikely leak areas and pipe failure riskSystem-wide screening and capital planning

Pressure: The Underused Signal

Pressure transients, sudden surges and drops caused by pump starts, valve operations or other events, can stress pipes repeatedly. Over time, these surges contribute to breaks in aging mains. High-frequency pressure sensors reveal transients that standard monitoring misses, helping utilities adjust pump controls and operating practices. Pressure data during an outage also shows which areas still have water, which Atlanta officials have said is a goal for improving response.

Valves: The Lesson From Atlanta

A break is far worse if crews cannot shut it off quickly. Atlanta has said it enhanced software to help locate the roughly 70,000 valves in its system, and city officials have described the ability to isolate segments of the system as critical. Connected approaches to valve management include:

  • Digital maps that combine GIS records with field-verified locations.
  • Exercising programs that record each valve's condition and number of turns.
  • Sensors on critical valves that report position and operation.
  • Isolation modeling that shows which customers lose service when specific valves close.

Valve programs are less visible than new pipe, but they often deliver some of the biggest improvements in outage response.

Protecting Critical Customers

Hospitals, dialysis centers, senior care facilities, schools and correctional institutions are especially vulnerable to water loss. Atlanta's deployment of leak detection at more than 1,600 locations serving these facilities reflects a practical approach: start monitoring where the consequences of failure are highest. Pressure sensors at critical customers can provide early warning and confirm service during incidents.

Communicating With Customers

Connected systems also change how utilities communicate during incidents. Atlanta has said it now aims to share main break details with the public quickly, even before crews know the precise location, along with information on where affected residents can get water. Pressure data showing which areas still have service helps target notices to the right neighborhoods. Smart meter portals and alerts can warn customers about leaks on their side of the meter, reducing high bills and complaints. Clear, data-backed communication builds trust during disruptions and supports the case for long-term investment.

Data Is Only Useful If Someone Acts

Connected sensors produce alerts. Utilities need processes to verify, prioritize and act on them:

  1. Triage. Decide which alerts need field verification and how quickly.
  2. Verify. Use correlators or ground microphones to pinpoint leaks.
  3. Prioritize. Rank repairs by size, location, pipe condition and consequence of failure.
  4. Repair and record. Track repairs and outcomes to improve future decisions.
  5. Feed planning. Use leak and break history to guide pipe replacement priorities.

Options for Smaller Georgia Utilities

Not every Georgia water system has Atlanta's budget. Smaller cities and counties can still gain early warning:

  • Shared networks. Georgia Power offers cities and counties access to its statewide AMI network for reading water meters remotely, avoiding the cost of building their own.
  • Targeted sensors. Start with a few pressure sensors and acoustic loggers on the oldest or most critical mains.
  • District metering. Divide the system into zones and track nighttime flow to find leak-heavy areas.
  • Service models. Some vendors offer leak detection as a service, reducing upfront costs.
  • Funding programs. State and federal water infrastructure funds may support monitoring as part of broader projects.

Our article on building the AMI business case for Georgia water utilities covers budgeting.

An Illustrative Example

Consider a hypothetical city water system in North Georgia serving 25,000 customers with many cast iron mains installed in the mid-1900s. Water loss audits show high non-revenue water, and the city has had several disruptive breaks downtown. Rather than replacing pipes at random, the utility installs acoustic sensors on downtown mains, pressure sensors at its hospital and two schools, and flow meters to create four monitoring districts. Within months, acoustic data points to several hidden leaks, nighttime flow shows one district losing far more water than others, and pressure data reveals surges every morning when a pump station starts. The city repairs the leaks, adjusts pump controls to reduce surges and uses the district data to prioritize pipe replacement. It also verifies and maps downtown valves so crews can isolate breaks faster.

Questions to Ask Before Buying

  • Which pipe materials and sizes does the acoustic technology work best on?
  • How are alerts verified, and what false alarm rate should we expect?
  • How does the system integrate with our GIS, work order and SCADA systems?
  • What communications network does it use, and can we use existing AMI infrastructure?
  • How long do batteries last in vaults and below-ground installations?
  • Can we export all data if we change vendors?

Cybersecurity for Water Systems

Water systems have become targets for cyberattacks nationally. Connected sensors, remote access and control systems must be secured with network segmentation, strong authentication, monitoring and incident response plans. Utilities should treat monitoring networks as part of their critical infrastructure. See our IIoT security primer for practical starting points.

Where Georgia Water Systems Are Heading

Expect more Georgia utilities to combine acoustic, pressure and flow monitoring with smart meters and AI-based risk models that predict which pipes are most likely to fail. Valve management will receive more attention after Atlanta's experience. Customers will see more real-time usage data and leak alerts, and Atlanta has said it is exploring tools that give residents real-time information about their water use. With long-term pipe replacement programs that will take decades, connected monitoring is how utilities can reduce risk in the meantime and spend replacement dollars where they matter most.

For related reading, see our articles on smart meter and grid intelligence, IoT sensors for public infrastructure and environmental sensors in emergency planning. To find water technology partners, browse the IoT Georgia company directory or explore smart utilities providers in Atlanta and Savannah. Browse more of our Smart Utilities coverage.

Frequently asked questions

A series of large water main breaks beginning May 31, 2024, in downtown and Midtown. Officials said some valves were hard to find or failed, which made isolating the breaks more difficult.

Acoustic sensors hear leaks, pressure sensors catch drops and surges, flow monitoring reveals unexplained nighttime use and smart meters detect customer-side leaks before they grow.

Crews must close valves to isolate a break. If valves are missing from records or fail to operate, outages spread to more customers and last longer.

Atlanta announced a long-term plan estimated at about $2 billion over 20 years and deployed leak detection devices at more than 1,600 locations serving critical facilities such as hospitals.

Yes. Options include using Georgia Power's statewide AMI network, starting with targeted sensors on critical mains, district metering, service-based leak detection and funding programs.

Sudden pressure surges and drops repeatedly stress pipes and can contribute to breaks. High-frequency pressure monitoring helps utilities adjust pump and valve operations to reduce them.

Related articles

Top