Manufacturing IoT
IoT in Automotive Manufacturing: Shop-by-Shop Lessons from Georgia's Auto, EV and Battery Plants
Published by IOT Georgia Research & Editorial Team

- The Shops at a Glance
- Stamping: Protecting the Most Expensive Minutes
- Body Shop: Robots, Welds and Fixtures
- Paint Shop: Where Georgia Humidity Matters
- General Assembly: Every Bolt Has a Record
- Battery Production: A Different Kind of Plant
- Mixed-Model Lines: Lessons From West Point
- The Supplier Layer
- Challenges Specific to Auto Plants
- Implementation Advice for Georgia Auto Suppliers
- An Illustrative Supplier Example
- Where Automotive IoT Is Heading in Georgia
An automotive plant is really several factories under one roof. Stamping, body, paint, general assembly and, increasingly, battery production each have different processes, failure modes and data needs. Talking about IoT in automotive manufacturing as one topic hides those differences. Walking through the plant shop by shop shows where connected sensors pay back and why.
Georgia is a good place to do that walk. Kia's West Point plant has built vehicles since 2009, and the company has said more than 40 percent of the Kia vehicles sold in the U.S. are made there. Since 2024 the plant has assembled the electric EV9 on the same line as gasoline models. Hyundai Motor Group Metaplant America in Ellabell opened in 2025 as a software-defined factory with a battery cell plant on site, and Rivian is building a plant at Stanton Springs North with production expected in late 2028. Around them is a growing network of suppliers.
The Shops at a Glance
| Shop | Main Process | Highest-Value IoT Use | Key Signals |
|---|---|---|---|
| Stamping | Pressing steel and aluminum panels | Press and die health, changeover speed | Tonnage, strokes per minute, die ID, vibration |
| Body | Robotic welding and joining | Weld quality and robot uptime | Weld current and voltage, robot faults, fixture sensors |
| Paint | Pretreatment, coating and curing | Environmental control and energy | Booth temperature, humidity, airflow, oven profiles |
| General assembly | Installing thousands of parts | Error-proofing and traceability | Torque results, part scans, station cycle times |
| Battery | Cell and pack production | Process control, safety, traceability | Dry room dew point, formation data, thermal monitoring |
| Logistics | Part delivery and sequencing | Material flow and inventory accuracy | AMR location, container tracking, line-side stock |
Stamping: Protecting the Most Expensive Minutes
Large press lines are among the most capital-intensive assets in a vehicle plant. Rivian has described its Georgia stamping area as one of the most demanding parts of the construction. In operation, tonnage monitors on each press detect when forces drift, which can indicate die wear, material variation or misfeeds before they damage tooling. Die tracking tells the plant which die is in which press and how many hits it has taken since maintenance. Vibration and lubrication monitoring on press drives and bearings prevents long outages. For suppliers running smaller press lines, strokes per minute and die change time are usually the first metrics to capture.
Body Shop: Robots, Welds and Fixtures
A body shop can contain hundreds of robots. Each one is a source of data on faults, cycle times and joint health. Weld controllers record current, voltage and time for every spot weld, and monitoring those values helps spot tip wear or process drift before quality suffers. Fixture sensors confirm that parts are clamped correctly. Predictive maintenance on robot gearboxes and servo motors, based on torque and vibration trends, avoids line stops that can idle hundreds of workers downstream.
Paint Shop: Where Georgia Humidity Matters
Paint quality depends heavily on temperature, humidity and airflow in booths, and on accurate time and temperature profiles in curing ovens. Georgia's hot, humid summers put extra load on air handling systems that condition booth air. Continuous environmental monitoring lets the plant see when conditions approach limits and adjust before defects appear. Paint shops are also among the largest energy users in a vehicle plant, so submetering fans, ovens and air handlers reveals significant savings opportunities.
General Assembly: Every Bolt Has a Record
General assembly is where traceability matters most. Connected torque tools record the result of every critical fastener and link it to the vehicle identification number. Scanners confirm that the right part variant is installed on each vehicle, which is essential on mixed-model lines like Kia's, where EVs and gasoline vehicles share the same line. Station cycle time data shows where operators struggle to keep pace, especially during new model launches. Autonomous mobile robots and automated guided vehicles delivering parts generate their own location and status data.
Battery Production: A Different Kind of Plant
Battery cell manufacturing looks more like chemical or semiconductor production than traditional auto assembly. Georgia now has several cell and pack operations, including the battery joint venture at the Ellabell campus designed for 40 GWh of annual capacity. Key IoT applications include:
- Dry room monitoring. Electrode and cell assembly require extremely low humidity. In a state known for humid summers, dew point monitoring and dehumidification control are critical and energy intensive.
- Formation and aging data. Each cell is charged and tested over many hours, generating detailed data that predicts quality and grading.
- Thermal and gas monitoring. Early detection of abnormal heat or off-gassing supports fire prevention.
- Genealogy. Linking materials, electrodes, cells, modules and packs supports recalls and emerging battery documentation requirements in some markets.
Mixed-Model Lines: Lessons From West Point
Building EVs and gasoline vehicles on one line, as Kia does in West Point, gives a plant flexibility to follow demand but adds complexity. Every station must know which vehicle is coming and which parts, tools and torque programs it needs. IoT supports this in several ways: vehicle identification is read at each station to select the right program, part scans confirm the correct variant is installed, and station cycle time data shows where EV and gasoline builds differ in workload so staffing and line balance can be adjusted. High-voltage battery installation and testing introduce new safety checks that must be recorded as carefully as torque. For suppliers, mixed-model production means sequence accuracy matters more than ever, since a part delivered in the wrong order can stop the line.
The Supplier Layer
Most of the auto industry's IoT story in Georgia happens at suppliers. Plants that deliver seats, modules, wiring, stampings and plastic parts often ship just in time or in sequence, meaning parts must arrive in the exact order vehicles are built. That requires real-time visibility into production, inventory and shipments. Suppliers increasingly need to:
- Capture machine state and output data to prove capacity and support delivery commitments.
- Record process and inspection data tied to lots or serial numbers for traceability.
- Track returnable containers, which are expensive and easy to lose. See our guide to IoT asset tracking in Georgia.
- Exchange data electronically with OEM systems for schedules, shipping notices and quality issues.
Hyundai has committed billions of dollars to localizing parts and logistics around its Georgia operations, which will continue drawing suppliers into the state and raising expectations on those already here.
Challenges Specific to Auto Plants
- Launch pressure. New models and plant launches leave little time for data projects, so data requirements must be built into launch plans.
- Mixed-model complexity. Lines building EVs and gasoline vehicles together multiply part variants and error-proofing needs.
- Cybersecurity. Automakers have been targeted by ransomware, and supplier plants can be an entry point. Network segmentation and controlled remote access are baseline requirements. Our IIoT security primer explains the essentials.
- Skills. Technicians need robotics, controls and data skills. Georgia Quick Start operates the Kia Georgia Training Center and supports workforce training for other new and expanding manufacturers.
Implementation Advice for Georgia Auto Suppliers
- Start with the process your customer audits most, often torque, welding or inspection, and make that data complete and retrievable.
- Monitor constraint equipment for downtime and cycle time so delivery risks are visible early. Our guide to machine monitoring in Georgia factories shows how to read that data.
- Standardize part and lot identification across receiving, production and shipping.
- Choose platforms that can share data with customer systems without custom work for every request.
- Budget for the people who will review data daily, not just the hardware.
An Illustrative Supplier Example
Imagine a 180-person plastics supplier near LaGrange that molds and assembles interior trim for a nearby assembly plant. The customer reports a fit issue on a door panel and asks which parts are affected. Before connecting its presses, the supplier would have needed days to search paper records. After adding press monitoring tied to lot labels and scanning at assembly, the team can see that the affected lot ran on one press during a night shift, shortly after a mold change, with cycle times above standard. They quarantine a narrow range of parts, correct the process and share the records with the customer within hours. The result is a contained issue instead of a broad containment effort, and a stronger position when the next contract is awarded.
Where Automotive IoT Is Heading in Georgia
The biggest near-term change is physical AI. Boston Dynamics opened a Robotics Metaplant Application Center at the Ellabell campus in September 2026 to train Atlas humanoid robots on tasks such as sequencing parts, and Hyundai plans to deploy humanoids at the plant starting in 2028, with Kia's Georgia plant expected to follow. Those robots will depend on the same foundation described above: clean data, reliable networks and well-defined processes. Digital twins of lines and plants will become more common for planning launches and changes. And battery production will keep pushing Georgia plants toward the kind of precise environmental control and data depth once seen mainly in semiconductor fabs.
For related reading, see our look at smart factory design for Georgia plants and our overview of supply chain visibility with connected sensors. To find automotive IoT partners, browse the IoT Georgia company directory or explore manufacturing IoT providers in Savannah and Columbus. Browse more of our Manufacturing IoT coverage.
Related articles
Manufacturing IoT
Manufacturing IoT
Robotics and IoT Are Changing Automotive Manufacturing in Georgia: What the Robot Fleet Needs to Run Well
Manufacturing IoT
Hyundai's Georgia Metaplant: Inside the State's New Smart-Manufacturing Model
Manufacturing IoT
